Micro gas–solid devices evaluate with minimal catalyst, reducing cost and speeding up—suited to early catalyst screening and rapid condition scouting, before deciding on scale-up to a standard device.
The PLR RVTF-PMII Micro Gas-Solid Catalytic Reaction Evaluation Device offers a compact gas–solid evaluation platform with low material use and fast heating—the preferred stepping stone before pilot-scale work.
Load a small amount of catalyst, feed reaction gas, detect products online or offline, and quickly obtain initial conversion and selectivity; then move promising samples to the PLR-GSPR Atmospheric-Pressure Gas-Solid Photocatalytic Reaction System for precise measurement.
Micro devices transfer heat fast but have limited representativeness; always re-verify on a standard device before scale-up to avoid distorted extrapolation.
Free consultation: Want to save material and time in catalyst screening? Perfectlight's PLR RVTF-PMII Micro Gas-Solid Catalytic Reaction Evaluation Device uses micro samples to help you scout and then scale up quickly.
Tel: 400-1161-365 / 010-62128921 Perfectlight Official Website
It evaluates with minimal catalyst, cutting cost and time for early screening and rapid condition scouting before scale-up.
It is a compact gas–solid platform with low material use and fast heating, an ideal pre-pilot stepping stone.
Micro devices transfer heat fast but are less representative; re-verify on a standard device before scale-up.
This article does not constitute a performance commitment; specific technical parameters are subject to the actual product documentation and mutual confirmation.
}}]}
