This device is a multi-system set constructed for desktop-scale micro gas-solid phase catalytic reaction evaluation in the laboratory. It is mainly composed of four parts: the gas supply system (default 2 channels, 2~4 channels optional), the reaction system (light source optional), the condensation/separation system, and the back-pressure control system. The control center uses PLC programming and high-definition touch operation control.
Integrated and compact: desktop use, small footprint;
Good light transmission: built-in light guiding, large area and high light efficiency;
Easy to use: reactors are easy to disassemble, quick and labor-saving;
Flexible operation: intelligent IoT, supports remote debugging;
High safety: electrical isolation, excellent system gas tightness.
▲ Particularly suitable ● More suitable ○ Can be used
▲ Hydrogenation ▲ Methane oxidation ▲ Carbon dioxide reduction
▲ VOCs degradation ▲ SCR denitrification ▲ Biomass degradation
▲ Alkane cracking ▲ Fischer–Tropsch synthesis ▲ Catalyst treatment
▲ Methane conversion
Top-illumination high-pressure photothermal reactor; thermal/photothermal modes can be switched arbitrarily, affecting the temperature field distribution;
PLC programming + HD touch screen, built-in WiFi networking, program upgrade services available upon request;
Optional flow program segment control function, default 100 segments configurable;
Optional intelligent IoT remote-control function.
| Basic Device Parameters | |
|---|---|
| System total volume | Approx. 200 mL |
| Separator tank volume | 60 mL |
| Reactor type | Top-illuminated photothermal reactor |
| Reaction mode | Photothermal catalysis |
| Device dimensions | Length 900 mm × Width 600 mm × Height 1000 mm |
| Power supply | 220 V AC / 16 A, power ≤ 3 kW |
| Feed Parameters | |
| Gases | 2 channels (flow rate 100 mL/min) |
| Heat-trace temperature | 100 ~ 240 °C |
| Operating Conditions | |
| Temperature range | 180 ~ 1050 °C (externally controlled), temperature control stability ≤ ±1 °C, for >800 °C custom quartz is recommended |
| Pressure range | 0.1 (gauge) ~ 5.5 MPa Pressure sensor: range 6 MPa, accuracy 0.2%, resolution 1 kPa |
| Catalyst filling amount | 0.1 ~ 0.5 mL (1 ~ 5 mm bed height) Includes quartz liners / light-guiding rods, 2 pieces Other photothermal filling amounts can be customized; thermal catalysis requires customization |
| Reactor | High-pressure photothermal reactor |
| Reaction furnace | Ceramic fiber heating furnace |
