Methane conversion is low and product concentration small; oxygenates easily adsorb or degrade, so a slight mistake ruins accuracy. The evaluation device must pair with high-sensitivity, low-dead-volume detection.
The outlet gas of the PLR-CTPR can connect to the PLD-CGA1000 Composite Gas Analyzer for real-time quantification of multiple components, or to a Gas Chromatograph for high-resolution qualitative and quantitative analysis, shortening sampling intervals and capturing transient changes.
Complex oxygenates hard to resolve online can be supplemented by offline GC-MS or liquid-phase analysis, cross-validated with online data to avoid misjudging by-products.
Free consultation: Methane-conversion products too trace to measure accurately? Perfectlight's PLR-CTPR with the PLD-CGA1000 Composite Gas Analyzer and a Gas Chromatograph turns online quantification into a standard scheme.
Tel: 400-1161-365 / 010-62128921 Perfectlight Official Website
Low conversion, tiny product concentration, and oxygenates that adsorb or degrade mean only high-sensitivity, low-dead-volume detection gives accurate results.
The PLR-CTPR outlet connects to the PLD-CGA1000 for multi-component real-time quantification or to a Gas Chromatograph for high-resolution analysis.
Use standard-gas calibration curves, monitor carbon balance to confirm carbon source, and periodically recalibrate the detector in long runs.
This article does not constitute a performance commitment; specific technical parameters are subject to the actual product documentation and mutual confirmation.
}}]}
